MAK Picatinny Rail for Sako 75/85 M, L, XL

Introduction

Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why ring mounts made for a Weaver rail will also fit on a Picatinny rail while ring mounts made specifically for a Picatinny rail will not fit on a Weaver rail. This is one of the main reasons why Picatinny is a far better mounting solution.

MAK is one of the biggest mount manufacturers in Germany. All of their Picatinny rails are manufactured from high-quality steel and are known for their mat finish that does not reflect light. The edges of the rails are wavy, adding to the high-quality appearance. MAK Picatinny rails lack a slot that would allow the user to use the Picatinny rail with sights.

About the rifle

Sako or Civil Guard Gun-Machiningworks LTD is a Finnish firearm producer located in Riihimäki. It was founded in 1919 as a workshop for repairing military rifles left from WW I. In 1921, it became an independent commercial enterprise. They started exporting pistol cartridges to Sweden in the 1930s. After WW II, Sako started manufacturing rifles. Their first invention was the Model L-42 rifle (patented in 1942), followed by L-46 in 1949. For a short period of time, Sako Firearms also produced lever-action rifles (Finnwolf) and rimfire rifles (Finnscout). Over decades, Sako produced more than 40 different models of firearms with various rifle chamberings. The company was owned by a series of owners. Currently, owner of the company is an Italian firearms holding company Beretta Holding. In 2013, Sako reached a new production record of over 100.000 rifles produced.

Sako 85 is a bolt-action rifle with a controlled-feed action. Similarly to other Sako rifles, model 85 has a conical dove-tail on the top of the action which tapers towards the rear part of the receiver – for mounting purposes (front dove-tail base is wider than the rear dove-tail base). There are no mounting holes. Barrels are drilled, honed and cold-hammer forged. Sako 85 features a recoil stop at the rear mounting surface.

Sako 85 rifles come in six action sizes: XS, S, SM, M, L, and XL. This mount is suitable for M, L and XL action lengths since the front mounting surface can be moved and fixed at various positions.

Sako 85 is available in six action lengths. When a rifle is available in more than one action length, only two-piece mounts are interchangeable between these rifles (a two-piece mount made for Sako 85 L-XL can also be mounted on Sako 85 XS, S, SM, and M). One-piece mounts will only fit a rifle with a specific action length (a one-piece mount made for Sako 85 L-XL will not fit Sako 85 XS, S, SM, and M). This one-piece mount is an exception since the front mounting surface can be moved.

Rifles Sako Forest-Finnbear, Vixen and models 75/85 have similar actions. This is why, for example, two-piece mounts made for Sako Forest-Finnbear will fit rifles Sako Vixen and models 75/85 while one-piece mounts made for Sako Forest-Finnbear will not fit rifles Sako Vixen and models 75/85. These rifles do not have mounting surfaces with radiuses since they have a dove-tail on the receiver. Sako dove-tails are conical – they taper towards the rear part of the receiver.

This mount will also fit Sako 75 rifles of all receiver lengths.

A: / (no holes)
B: / (no holes)
C: / (no holes)
BHU: 0 mm
Fi: /
R1: Prisma
R2: Prisma

Mounting instructions

Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.

Warranty

The product has a warranty period of 10 years.